NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-475002.png)
5. Disconnect the 20P, 4P, and 5P connectors.
CAUTION: Be careful not to damage the SRS wire harness.
Hazard Warning Switch Replacement
6. Remove the six screws, then remove the hazard warning-wiper switch assembly.
Hazard Warning Switch Replacement
7. Remove the screws, then separate the hazard warning switch from the other switches.
Hazard Warning Switch Replacement
8. If necessary, remove the hazard warning switch bulb.
