NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-547001.png)
Crankshaft Position Sensor: Service and Repair
REPLACEMENT
NOTE: Turn the crankshaft so that the No. 1 piston is at top dead center.
1. Remove the timing belt.
2. Remove the front intake and exhaust camshaft pulleys.
3. Remove the back cover.
4. Remove the Crankshaft Position/Camshaft Position (CKP/CYP) sensor from the front cylinder head.
5. Install the CKP/CYP sensor in the reverse order of removal.
