NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-3260003.png)
Starter Cut Relay Test
3. Check continuity at the relay terminals.
^ There should be continuity between the C and D terminals.
^ There should be continuity between the A and B terminals when power and ground are connected to the C and D terminals.
^ There should be no continuity between the A and B terminals when power is disconnected.
Clutch Interlock Switch Test (M/T)
1. Remove the dashboard lower cover, then disconnect the 2P connector from the switch.
Clutch Interlock Switch Test (M/T)
