NSX V6-3.0L DOHC (1991)
13.
With the 13-P DIN cable and 25-P transceiver connectors disconnected, check continuity between every terminal in the DIN connector and each of
the other terminals:
Is there continuity between any of the terminals?
Yes - Replace the transceiver (power) harness.[ ]
No - Replace the transceiver.[ ]
14.
Disconnect the 25-P connector from the transceiver and the 14-P connector from the control box. Check continuity between these terminals:
^
Between terminal 8 at the 25-P connector and terminal 13 at the 14-P connector.
^
Between terminal 1 at the 25-P connector and terminal 8 at the 14-P connector.