NSX V6-3.0L DOHC (1991)
6. Disconnect the receiver line and the suction line from the evaporator. Cap the open fittings immediately to keep moisture out of the system.
7. Remove the dashboard. See: Body and Frame
8. Remove the heater duct.
9. Remove the mounting bolts(4) and disconnect the connectors from control units and evaporator temperature sensor connector from the control unit
bracket, then remove the control unit bracket.
10. Remove the enclosure woofer.
11. Disconnect the connectors from all the actuators and sensors attached to the heater-evaporator.
