NSX V6-3.0L DOHC (1991)
7.
Lower the window and open the door. Raise the window until it just contacts the rear sash rubber. Watch the rubber while you raise the window
fully.
B.
If the window pushes the sash rubber out more than 1.5 mm, adjust the sash so this bulge is no more than 1 mm. If necessary, file the
mounting holes in the door to allow sufficient adjustment.
9.
Repeat steps 7 and 8 for the front sash.
10.
Reassemble the door. Check for wind and water leaks.
PARTS INFORMATION
Holder Assembly:
Right front
P/N 72240-SL0-003
Right rear
P/N 72242-SL0-003
Left front
P/N 72280-SL0-003
Left rear
P/N 72282-SL0-003
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out-of-warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must
request consideration, and get the DSM's decision, before starting work.
Operation numberi
Left door 824135
Right door 825135
Flat rate time:
2.0 hours per door
Failed P/N:
72242-SL0-003