NSX V6-3.2L DOHC (2001)
Air Bag: Description and Operation
SRS Airbag
The SRS is a safety device which, when used in conjunction with the seat belt, is designed to help protect the driver and front passenger in a frontal
impact exceeding a certain set limit. The system consists of the SRS unit (including safing sensor [side airbag models] and frontal impact sensor), the
cable reel, the driver's airbag, front passenger's airbag, and side airbags (if equipped).
Seats with Side Airbags
Seats with side airbags have a "SIDE AIRBAG" label on the seat-back. Because the component pants (seat-back cover, cushion, etc.) of seats with and
without airbags are different, make sure you install only the correct replacement parts.
-
When cleaning, do not saturate the seat with liquid, and do not spray steam on the seat.
-
Do not repair a torn or frayed seat-back cover. Replace the seat-back cover.
-
After a collision in which the side airbag was deployed, replace the side airbag with new pants. If the seat-back cushion is split, it must be
replaced. If the seat-back frame is deformed, it must be replaced.
-
Never put after market accessories on the seat (covers, pads, seat heaters, lights, etc.).
Supplemental Restraint System
Side Airbags
The side airbags (E) are in each front seat-back. They help protect the upper torso of the driver or front seat passenger during a moderate to severe side
impact. Side impact sensors (F) in each door sill and in the SRS unit detect such an impact and instantly inflate the driver's or the passenger's side airbag.
Only one side airbag will deploy during a side impact. If the impact is on the passenger's side, the passenger's side airbag will deploy even if there is no
passenger
