NSX V6-3.2L DOHC (2001)
Passenger's Airbag
4. Tighten the three airbag mounting nuts, then tighten the two mounting nuts on the bracket.
5. Remove the short connectors from the passenger's airbag connector and from the SRS main harness connector.
6. Reconnect the passenger's airbag 3P connector to the SRS main harness connector.
Passenger's Airbag
7. Reinstall the glove box.
8. Remove the short connectors from the driver's airbag connector and from the cable reel 3P connector.
9. Remove the short connectors from the seat belt tensioners, then attach them to their holders.
