NSX V6-3.2L DOHC (2001)
2. Install the steering wheel.
NOTE: Be sure the steering wheel shaft engages the cable reel.
3. Attach the cruise control set/resume switches 4P connector to the steering wheel clips.
4. Connect the horn connector.
5. Install the airbag assembly with new Torx bolts.
6. Disconnect the short connector from the airbag 3P connector.
7. Connect the airbag 3P connector and cable reel 3P connector.
8. Attach the short connector to the access panel, then install the access panel on the steering wheel lower cover.
