acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Steering|Tie Rod > < Airbag Handling and Storage|Page 6505
Page 5
background image

9. Connect the battery positive terminal, and then connect the negative terminal.

10. After installing the airbag assembly, confirm proper system operation:

a. Turn the ignition to on position; the instrument panel SRS indicator light should come on for about six seconds and then go off.
b. Confirm operation of horn buttons.
c. Confirm operation of cruise control set/resume switch.

d. Turn the steering wheel counterclockwise and make sure the yellow gear tooth still lines up with the alignment mark.

Steering|Tie Rod > < Airbag Handling and Storage|Page 6505