NSX V6-3.2L DOHC (2001)
Back Window Glass: Service and Repair
Rear Window
Removal
CAUTION: Wear gloves to remove and install the rear window.
1. To remove the rear window, first remove these items:
-
Seats
-
Center pillar trim panel
-
Rear upper trim panel
-
Rear hatch assembly
2. Remove the weatherstrip.
3. Disconnect the rear defogger sub-harness and ground cable/antenna lead, then remove the grommets.
4. Remove the rear defogger sub-harness and ground cable/antenna lead from the upper molding.
5. From outside the vehicle, use a knife to cut the upper and lower moldings all the way around. Cut the outer rubber portion (1) off the molding first,
then cut the top rubber portion (2).