NSX V6-3.2L DOHC (2001)
CAUTION: Take care not to scratch or score the rear window and body.
6. Apply protective tape along the edge of the body.
7. Using an awl, make a hole through the adhesive from inside the vehicle. Push piano wire through the hole, and wrap each end around a piece of
wood.
8. Pull the piano wire back and forth in a sawing motion, and carefully cut through the adhesive around the entire rear window.
CAUTION: Hold the piano wire as close to the rear window as possible to prevent damage to the body.
Installation
1. With a knife scrape the old adhesive smooth to a thickness of about 2 mm (0.08 in.) on the bonding surface around the entire rear window flange.