NSX V6-3.2L DOHC (VTEC) (1997)
Modulator/Solenoid Unit: Service and Repair
Motor Relay Location
1. Remove the motor relay from the under-hood fuse/relay box.
2. Install the special tool into the two motor relay cavities in the relay box.
3. Disconnect the four modulator solenoid connectors.
4. Bleed any high-pressure fluid from the maintenance bleeder with the special tool, then retighten the bleeder.
5. Connect the RED terminal from one solenoid connector to the battery positive (+) terminal with a remote starter switch. Connect the BLK terminal