NSX V6-3.2L DOHC (VTEC) (1997)
Torque Sequence
8. Tighten each bolt two turns at a time in the sequence shown to insure that the rockers do not bind on the valves.
NOTE: Apply clean engine oil to 8 mm bolt threads.
-
Specified torque:
-
Bolts 1 through 24 (8 mm x 1.25 mm bolts): 22 Nm (16 ft. lbs.)
-
Bolts 25 through 28 (6 mm x 1.0 mm bolts): 9.8 Nm (87 in. lbs.)
9. Install the Crankshaft Position/Camshaft Position (CKP/CYP) sensor on the front cylinder head.