NSX V6-3.2L DOHC (VTEC) (1997)
10. Install the front and rear back covers.
11. Insert the dowel pins in the camshaft pulley.
12. Install the camshaft pulleys, then tighten the retaining bolts to the torque specified.
13. Install the timing belt.
14. Adjust the valve clearance.
15. Inspect the rocker arms.
16. Install the head cover gasket in the groove of the cylinder head cover. Seat the recesses for the camshaft first, then work it into the groove
around the outside edges.
NOTE:
-
Before installing the head cover gasket, thoroughly clean the seal and the groove.