NSX V6-3.2L DOHC (VTEC) (1997)
2. Remove the three anchor bolts, retractor bolt and retractor mounting bolt, then remove the seat belt and seat belt buckle.
CAUTION: When removing the retractor, do not touch the seat belt tensioner.
NOTE: When removing the anchor bolts and retractor bolt.
3. Check that the retractor locking mechanism functions correctly.
4. Installation is the reverse of the removal procedure.
NOTE:
-
Make sure you assemble the washers on the anchor bolts as shown.
-
Before attaching the center pillar trim panel, make sure there are no twists or kinks in the seat belts.
-
On reassembly, replace the anchor bolts (*) and use liquid thread lock.