NSX V6-3.2L DOHC (VTEC) (1997)
b. Camber: Loosen the self-locking nut on the front lower control arm adjusting point, and adjust the camber by turning the adjusting cam.
6. Measure the caster on the both sides, and adjust the caster to specifications. Caster: Loosen the pivot adjuster mounting nuts (self-locking nuts)
under the compliance pivot, and adjust the caster by turning the adjusting cam.
7. Remeasure and, if necessary, adjust the camber and toe on the left side first, then the right side. Front Specifications:
a. Toe-out: 3.5 ± 1.0 mm (5/32 ± 1/16 inch).
b. Camber: -0°20' ± 30'.
c. Caster: 8°00' ± 45'.