NSX V6-3.2L DOHC (VTEC) (1997)
Alignment: Service and Repair
Rear
NOTE: NSX/NSX-T four wheel alignment requires the use of equipment designed specifically for four wheel independent suspensions and capable of
immediate feedback.
1. Drive the vehicle on the alignment rack.
2. Check the tire pressure and ride height.
3. Center the steering wheel.
a. Toe
(1) Measure the length of the threaded section on the right and led toe control arms.
Standard: 4.0 mm (3/16 inch).
Difference between right and left: 1.0 mm (1/16 inch) max.
(2) If the measurement is out of specification, loosen the locknuts, and adjust the rear toe by turning the right and left tie-rods.