NSX V6-3.2L DOHC (VTEC) (1997)
b. Install the special tool on the pinion shaft and check the preload with a spring scale. If the preload is out of the specification, adjust the rack
guide. Preload 29 N (6.6 lbs.) maximum
6. Screw each rack end into the rack while holding the lock washer so its tabs are in the slots in the rack end.
NOTE: Install the stop washer with the chamfered side facing out.
7. Tighten the rack end securely, then bend the lock washer back against the flat on the flange as shown.