NSX V6-3.2L DOHC (VTEC) (1997)
5. Install the damper mounting rubber and damper mounting washer, and loosely install a new self-locking nut.
6. Hold the damper shaft, and tighten the self-locking nut.
INSTALLATION
1. Reposition the damper assembly between the frame and knuckle.
2. Install the stabilizer link and connect the stabilizer bar.
3. Loosely install a new self-locking nut.
4. Hold the ball pin of the stabilizer link with a hex wrench, then tighten the self-locking nut.
5. Loosely install a new damper mounting nut.
NOTE: The damper mounting nuts should be tightened with the damper under vehicle load.