NSX V6-3.2L DOHC (VTEC) (1997)
NOTE:
-
Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
-
Blow out all passages.
-
Replace valve body as an assembly if any parts are worn or damaged.
-
Check all valves for free movement. If any fail to slide freely, see Valve Body Repair.
-
Coat all parts with ATF before reassembly.
-
All check balls are the same size (7/32) #7.
CAUTION: Do not use a magnet to remove the check balls; it may magnetize the balls.