RDX L4-2.3L Turbo (2008)
Front Bumper: Removal and Replacement
Front Bumper Removal/Installation
NOTE:
-
Have an assistant help you when removing and installing the front bumper.
-
Take care not to scratch the front bumper and body.
-
Put on gloves to protect your hands.
1. Remove the screws (A, B), and clips (C, D) securing the front bumper (E).
NOTE: To remove the clips, pry the inner clip up at the edge near the line (F) on its head.
2. Pull on the front bumper (A) at the wheel arch areas to release it from the hooks (B) on the side spacers (C).
