RDX L4-2.3L Turbo (2008)
3. With the help of an assistant, while pulling the wheel arch portion away from the side spacer (A), pull the front bumper to release the bumper from
the hooks (B) on the corner upper beam (C).
4. With the help of an assistant, disconnect the front fog light connectors (A), then remove the front bumper (B).
5. Remove the front bumper absorber (A) from the front bumper beam (B).
6. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the front fog light connectors are plugged in properly.
-
Make sure the front bumper engages the hooks (of both corner upper beams and side spacers) on each side securely.
-
Push the clips and hooks into place securely.
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.