RDX L4-2.3L Turbo (2008)
Rear Bumper: Service and Repair
Rear Bumper
Rear Bumper Removal/Installation
NOTE:
-
Have an assistant help you when removing and installing the rear bumper.
-
Take care not to scratch the rear bumper and body,
-
Put on gloves to protect your hands.
1. Remove the caps (A). Then remove the bolts (B), screws (C) and clips (D) securing the rear bumper (E).
2. Pull on the rear bumper (A) at the wheel arch areas to release it from the hooks (B) on the side spacers (C).
