RDX L4-2.3L Turbo (2008)
3. With the help of an assistant while pulling the wheel arch portion away from the side spacer (A), pull the rear bumper to release the bumper from
the hooks (B) on the side bracket (C).
4. With the help of an assistant, pull the rear bumper to release the bumper (A) from the hooks (B) on the upper bracket (C).
5. Remove the hooks (A), then remove the rear bumper absorber (B) from the rear bumper beam (C).
6. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the rear bumper engages the hooks (of both the side bracket and side spacers) on each side securely.
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips and hooks into place securely.
