RDX L4-2.3L Turbo (2008)
Front Door Latch: Service and Repair
Front Door Latch Replacement
NOTE: Put on gloves to protect your hands.
1. Raise the glass fully.
2. Remove the door panel and inner handle.
3. Remove the plastic cover, as needed.
4. Detach the rod fastener.
5. Disconnect the outer handle rod from the outer handle.
6. Pull the glass run channel (A) away as needed, and remove the bolt, then remove the center lower channel (B) by pulling it downward.
7. Disconnect the door lock cylinder cable from the latch.