RDX L4-2.3L Turbo (2008)
Sun Visor: Service and Repair
Sunvisor Removal/Installation
Special Tools Required
KTC trim tool set SOJATP20T4 *
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
1. From both sides, using a trim tool, release the tabs (A) from the bracket (B).
2. Remove the sunvisor cap (A) from the bracket (B). Turn the cap, and remove it.
3. Remove the sunvisor (A).
1. Using a T25 TORX bit, remove the self-tapping ET screws.