RDX L4-2.3L Turbo (2008)
Trim Panel: Service and Repair
Trim Removal/Installation - Cargo Area
Trim Removal/Installation - Cargo Area
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
Rear Trim Panel
1. Remove the cargo area floor.
2. Remove the tailgate weatherstrip, as needed.
3. Detach the clips (A, B, C) by pulling the rear trim panel (D).
4. Install the trim in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.
Cargo Area Floor
1. Remove the cargo area floor (A).
2. Install the floor in the reverse order of removal.
Cargo Area Lid
1. Fold both rear seats down.
2. Remove the cargo area cover and floor.
