RDX L4-2.3L Turbo (2008)
Seat Cover: Service and Repair
Front Seat Back Cover/Pad
Front Seat-back Cover/Pad Replacement
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
-
Check the operation of the driver's seat position sensor after any of these actions.
-
Driver's seat position sensor replacement
-
Cover plate (front side of driver's seat slide rail) replacement
-
Calibrate the ODS unit after any of these actions.
-
Front passenger's seat replacement (including any seat components)
-
Replacement of the seat weight sensors
-
After a vehicle collision
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
On the passenger's seat, do not touch the ODS sensor in the seat-back pad, and keep it away from oil. Oil can corrode the sensor causing it to fail.
-
Put on gloves to protect your hands.
1. Remove the front seat.
2. Remove the head restraint.
3. From under the seat cushion, release the hooks (A) from the seat cushion frame spring (B).
