RDX L4-2.3L Turbo (2008)
16. Put the lower block on the engine block.
17. Apply new engine oil to the threads of the bearing cap bolts.
18. Tighten the bearing cap bolts, in sequence, to 29 N-m (3.0 kgf-m, 22 lbf-ft).
19. Tighten the bearing cap bolts an additional 67°.
20. Tighten the 8 mm bolts, in sequence, to 22 N-m (2.2 kgf-m, 16 lbf-ft).
