RDX L4-2.3L Turbo (2008)
29. Raise the lift to full height.
30. Tighten the lower torque rod mounting bolt.
31. Lower the vehicle on the lift.
32. Install the air cleaner housing assembly.
33. Install the upper torque rod (A) and torque rod stiffener (B), and tighten the new stiffener mounting bolts (C), then tighten the new upper torque
rod mounting bolts in the numbered sequence shown.
34. Install the crankshaft pulley.
35. Install the variable valve timing control (VTC) oil control solenoid valve.
36. Install the cylinder head cover.
37. Install the drive belt.
38. Do the CKP pattern clear/CKP learn procedure.