RDX L4-2.3L Turbo (2008)
Connecting
Hold both connector halves, and press them firmly together until the projection (A) of the sleeve-side connector clicks.
Opening the SRS Unit Shorting Connectors for Diagnosis
Special Tools Required
SRS short canceller 070AZ-SAA0100
NOTE:
-
To prevent damaging of the connector cavity, insert the short canceller straight into the cavity from the terminal side.
-
Before installing the short canceller, wash it with electrical contact cleaner or neutral detergent, then dry it with compress air.
-
Do not use the short canceller if it is damaged.
-
Make sure to remove the short canceller before reconnection.
When SRS unit connectors A (28P), B (28P), or C (16P) are disconnected, a short circuit is created in the connector by its own function to prevent an
airbag deployment. The circuit may need to be open when diagnosis is done on the system. Insert the short canceller (T/N 070AZ-SAA0100) in the
specified cavities when it is necessary to keep the circuit open for diagnosis.
