RDX L4-2.3L Turbo (2008)
5. To prevent damage and keep foreign matter out, cover the disconnected connector and line ends with plastic bags (A).
NOTE: The retainer cannot be reused once it has been removed from the line. Replace the retainer when:
-
replacing the fuel rail.
-
replacing the fuel feed line.
-
replacing the fuel return line.
-
replacing the fuel pump.
-
replacing the fuel filter.
-
replacing the fuel gauge sending unit.
-
replacing the EVAP purge pipe.
-
replacing the EVAP canister.
-
replacing the fuel tank.
-
replacing the fuel fill pipe.
-
it has been removed from the line.
-
it is damaged.
Fuel Line/Quick-Connect Fitting Installation
NOTE: Before you work on the fuel lines and fittings, read the "Fuel Line/Quick-Connect Fitting Precautions".
1. Check the contact area (A) of the line (B) for dirt or damage, and clean it if needed.