RDX L4-2.3L Turbo (2008)
2. Insert a new retainer (A) into the connector (B) if the retainer is damaged, or after:
-
replacing the fuel rail.
-
replacing the fuel feed line.
-
replacing the fuel return line.
-
replacing the fuel pump.
-
replacing the fuel filter.
-
replacing the fuel gauge sending unit.
-
replacing the EVAP purge pipe.
-
replacing the EVAP canister.
-
replacing the fuel tank.
-
replacing the fuel fill pipe.
-
removing the retainer from the line.
-
Use the same manufacturer retainer and the same size retainer when the replacing the retainer.
3. Before connecting a new fuel tube/quick-connect fitting assembly (A), remove the old retainer from the mating line.
