RDX L4-2.3L Turbo (2008)
-
If it holds vacuum, replace the turbocharger bypass control solenoid valve.
-
If it doesn't hold vacuum, go to step 10.
10. Turn the ignition switch ON (II).
11. Select TURBOCHARGER BYPASS CONTROL SOLENOID VALVE ON in the INSPECTION MENU with the HDS.
12. Reapply vacuum to the port.
-
If it holds vacuum, the turbocharger bypass control solenoid valve is OK.
-
If it doesn't hold vacuum, replace the turbocharger bypass control solenoid valve.
