RDX L4-2.3L Turbo (2008)
Side Curtain Airbag
7. Disconnect the SRS wire harness 2P connector (A) from the side curtain airbag.
Seat Belt Tensioner
8. Disconnect the SRS wire harness 4P connector (A) from the seat belt tensioner. Pull the seat belt out all the way and cut it.
Seat Belt Buckle Tensioner
9. Disconnect the SRS wire harness 4P connector (A) from the seat belt buckle tensioner.
10. Cutoff each connector, and strip the ends of the wires. Twist each pair of unlike colored wires together, and clip an alligator clips (A) from the
deployment tool to each pair. Place the deployment tool at least 30 feet (10 meters) away from the vehicle.
