RDX L4-2.3L Turbo (2008)
2. Using masking tape on the headliner, mark the upper edge of each pillar trim.
3. Remove the pillar trim, and measure the headliner overlap.
-
If the overlap is less than 0.3 in. (8 mm), remove the tape, and install the pillar trim.
-
If the overlap is more than 0.3 in. (8 mm), go to step 4.
4. Carefully trim the headliner with a utility knife, reducing the overlap to less than 0.3 in. (8 mm).
5. Remove the tape, and install the pillar trim.
