RDX L4-2.3L Turbo (2008)
5. Install the wheel sensor harness clip (A), the wire guide (B), and the brake hose bracket (C) to the damper (D).
6. Raise them front suspensions width a floor jack to lead the suspension with the vehicle's weight.
7. Tighten the damper pinch bolts and the self-locking nuts to the specified torque value.
8. Tighten the flange nuts on top of the damper to the specified torque value, beginning with flange nut A and flange nut B.
9. Install the lid to the cowl cover.
10. Clean the mating surface of the brake disc and the inside of the wheel, then install the front wheel.
11. Check the wheel alignment, and adjust it if necessary.