RDX L4-2.3L Turbo (2008)
5. Remove the flange bolt (A) that connects the lower arm B and the knuckle.
6. Remove the flange bolt (C) that connects the lower arm B and the bottom of the damper.
7. Lower the floor jack gradually.
8. Remove the spring (A) and the lower spring cushion (B).
9. Remove the flange bolt (C) that connects to the body, and remove the spring mounting collar (D) and the spring mounting cushion (E) if necessary.
Installation
1. Install the spring mounting cushion (A) and the spring mounting collar (C), then tighten the flange bolt (D) to the specified torque value.
