RDX L4-2.3L Turbo (2008)
14. With a 6.0 mm wrench, turn the control shaft fully counterclockwise (viewed from the shaft end) to the P position. Turn the control shaft back two
click-stopped positions so it is in the N.
15. Install the transmission range switch (A) gently over the control shaft (B), and install the bolts loosely.
16. Install the new lock washer (A) over the control shaft (B) while aligning the projection (C) of the lock washer with the N positioning line (D) on
the transmission range switch (E), and install the locknut (F).
