RDX L4-2.3L Turbo (2008)
Differential Case: Service and Repair
Center Case Replacement
Center Case Replacement
1. Remove the rear differential.
2. Remove the rear differential front mounting brackets (A) from the rear differential (B).
3. Remove the differential fluid temperature sensor cover (A), differential fluid temperature sensor (B), O-ring (C), and rear differential harness
bracket (D).
4. Remove the rear differential left side case (A), the rear differential right side case (B), the 10 x 12 mm dowel pins (C) from the rear differential
center case (D).
5. Replace the rear differential center case.
6. Remove the dirt and oil from the sealing surfaces. Apply liquid gasket (P/N 08718-0001) to the sealing surface. Make sure you seal the entire
circumference of the bolt holes to prevent oil leakage.
