RDX L4-2.3L Turbo (2008)
NOTE:
^
You must assemble the housings within 5 minutes after applying the liquid gasket. If not, the sealing surface must be cleaned, and the liquid
gasket reapplied.
^
Allow it to cure at least 30 minutes after assembly before filling the differential with fluid.
7. Install the 8 x 12 mm dowel pins (A), the rear differential right side case (B), the rear differential left side case (C), and the mounting bolts (D) on
to the rear differential center case (E).
8. Tighten the mounting bolts in a crisscross pattern in several steps.
9. Install the differential fluid temperature sensor cover (A), differential fluid temperature sensor (B), new O-ring (C), and rear differential harness
bracket (0).
