RDX L4-2.3L Turbo (2008)
12. Install the 8 x 12 mm dowel pins (A), the rear differential right side case (B) or the rear differential left side case (C) and the mounting bolts (D).
13. Tighten the mounting bolts in a crisscross pattern in several steps.
14. Remove the rear differential left side case (A) or the rear differential right side case (B), the 10 x 12 mm dowel pins (C) from the rear differential
center case (D).
15. Remove the ring gear (A), needle bearing (B), and the 60.2 mm shim (C) from the differential side case (D).