RDX L4-2.3L Turbo (2008)
^
Allow it to cure at least 30 minutes after assembly before filling the differential with fluid.
20. Install the 8 x 12 mm dowel pins (A), the rear differential right side case (B) or the rear differential left side case (C), and the mounting bolts (D)
onto the rear differential center case (E).
21. Tighten the mounting bolts in a crisscross pattern in several steps.
22. Install the differential fluid temperature sensor cover (A), differential fluid temperature sensor (B), new O-ring (C), and rear differential harness
bracket (D).
23. Install the rear differential front mounting brackets (A) on the rear differential (B).
