RDX L4-2.3L Turbo (2008)
Power Window Switch: Service and Repair
Power Window Switch Replacement
Driver's
1. Remove the driver's door panel.
2. Disconnect the 22P connector (A) from the power window master switch.
3. Remove the driver's door subharness (B) from the power window master switch.
4. Remove the three screws from the door panel, then pull up on the door pocket (C) to release the clips.
5. Remove the three screws and the power window master switch (A) from the door panel.
6. Remove the four screws and the power window master switch (A).
7. Install the switch in the reverse order of removal.
8. After replacement, reset the power window control unit.
Front passenger's
1. Removal the front passenger's door panel.
2. Disconnect the 14P connector (A) from the power window switch.
