RDX L4-2.3L Turbo (2008)
3. Remove the front passenger's door subharness (B) from the power window switch.
4. Remove the three screws from the door panel, then pull up on the door pocket (C) to release the clips.
5. Remove the three screws and the power window switch (A) from the door panel.
6. Remove the four screws and the power window switch.
7. Install the switch in the reverse order of removal.
8. After replacement, reset the power window control unit.
Rear passenger's
1. Removal the door panel.
2. Disconnect the 14P connector from the power window switch (A).
