RDX L4-2.3L Turbo (2008)
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
*REPAIR PROCEDURE - 2007 MODELS - ALL, 2008 MODELS FROM VIN 5J8TB1 ...8A00001 THRU 5J8TB1...8A16848*
1. Put the vehicle on a lift, and turn the ignition switch to ACC (I) to unlock the steering column.
2. Gently pull up the passenger's side front fender trim to release the clips, then remove the trim.
3. Remove the filler neck clips, then pull up on the filler neck, and rotate it rearward to disengage it from the reservoir.
NOTE:
Be careful not to damage the nearby brake lines or the A/C refrigerant lines.
4. Rotate the filler neck forward and inward as you pull it out through the body opening.
