RDX L4-2.3L Turbo (2008)
5. Remove the fasteners from the front of the right front inner fender, and pull the inner fender away as needed to access the washer reservoir. If
needed, unhook the upper right side of the bumper to improve access.
NOTE:
You can access the washer reservoir without removing the right front wheel or the entire inner fender.
6. Lubricate the grommet with washer fluid, and install it on the new filler neck.
7. Install the filler neck in the reservoir in the reverse order of removal.
8. Check that the grommet is firmly seated in the washer reservoir, then reinstall the filler neck clips.
