RDX L4-2.3L Turbo (2008)
*9. Loosen the three washer reservoir mounting bolts, then align the bolts, and torque them to 9.8 N.m (7.2 lb-ft) in the order shown.*
10. Reinstall the bumper (if unhooked), the inner fender, and the front fender trim. Replace any damaged trim clips.
*REPAIR PROCEDURE - 2008 MODELS FROM VIN 5J8TB1...8A016849 THRU 5J8TB1...8A099999, 2009 MODELS - ALL
1. Remove the fasteners from the front of the right front inner fender, and pull the inner fender away as needed to access the washer reservoir. If
needed, unhook the upper right side of the bumper to improve access.
NOTE:
You can access the washer reservoir without removing the right front wheel or the entire inner fender.*
