RDX AWD L4-2.3L Turbo (2010)
Rear Bumper: Removal and Replacement
Rear Bumper Removal/Installation
NOTE:
-
Have an assistant help you when removing and installing the rear bumper.
-
Take care not to scratch the rear bumper or the body.
-
Put on gloves to protect your hands.
1. Remove the caps (A). Then remove the bolts (B), the screws (C) and the clips (D, E) securing the rear bumper (F).
2. Pull on the rear bumper (A) at the wheel arch areas to release it from the hooks (B) on the side spacers (C).
3. With the help of an assistant, pull out one side of the rear bumper (A) away from the side spacers (B) as shown.Then pull the rear bumper out to
